单晶SiC的电助光催化抛光及去除机理

为满足电子半导体等领域对SiC超光滑、无损伤和材料高效去除的要求，提出了电助光催化抛光SiC的新方法。研究了光催化剂种类及其pH值对抛光液氧化性和抛光效果的影响，讨论了材料的去除机理。结果表明：以p25型TiO2为光催化剂配制抛光液所获得的最大氧化还原电位为633.11 mV，材料去除率为1.18 μm/h，表面粗糙度Ra=0.218 nm；抛光后SiC表面氧化产物中，Si-C-O、Si-O和Si4C4O4的含量明显增加，SiC表面被氧化并被机械去除是主要的材料去除方式。     

Numerical study of a concept for major repair and replacement of offshore wind turbine blades

Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack‐up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods for installation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore wind turbine blades. The concept involves a medium‐sized jack‐up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform for clamping, lowering, and lifting of a blade. A case study of a 5‐MW offshore wind turbine is shown, where common engineering practices were applied and numerical simulations of the marine operations were carried out using finite element and multibody simulation tools. Operational limits for wave and wind actions were established to demonstrate the technical feasibility of the proposed concept.     

Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit

Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively.     

CuInS2/SiNWs/Si composite material for application as potential photoelectrode for photoelectrochemical hydrogen generation

This work aims at developing a new composite material based on nanosized semiconducting CuInS₂ (CIS) particles combined with silicon nanowires grown on a silicon substrate (SiNWs/Si) for photoelectrochemical (PEC)-splitting of water. The CIS particles were prepared via a colloidal method using N-methylimidazole (NMI) as the solvent and an annealing treatment. The SiNWs were obtained by chemical etching of silicon (100) substrates assisted by a metal. The CIS/SiNWs/Si composite material was obtained by deposition of an aliquot of a suspension of CIS particles onto the SiNWs/Si substrate, using spin coating followed by a drying step. The XRD pattern demonstrated that CuInS₂ grows in the tetragonal/chalcopyrite phase, while SiNWs/Si presents a cubic structure. The SEM images show semi-spherical particles (～10 nm) distributed on the surface of silicon nanowires (～10 μm). The EIS measurements reveal n-type conductivity for CIS, SiNWs/Si and CIS/SiNWs/Si materials, which could favour the oxidation reaction of water molecules.     

滇南兰坪南厂铅锌矿矿床成因及成矿作用

南厂铅锌矿位于兰坪—思茅中生代坳陷北端，构造格局复杂，成矿条件优越。通过对矿床进行野外地质调查，对成矿地质背景、矿床地质特征、成矿机制和矿床成因进行了分析，发现南厂铅锌矿体主要呈透镜状赋存于第三系云龙组（Eyb）及下白垩统景星组（K1j1）地层中，与围岩接触部位发育微弱褪色蚀变，云龙组下段（Eya）是矿体底板有效的“屏蔽层”；区内发育原生砂岩型矿石、灰岩型矿石和氧化矿石，沉积构造特征明显，局部具有热液、变质作用改造特征；矿区地层、构造是矿床形成的重要因素，断裂构造是主要的容矿、导矿构造，高盐度热卤水沿导矿构造循环至有利层位、构造部位富集成矿，综合分析认为南厂矿床属热卤水为主的多成因层控型铅锌矿床。     

Microstructure−fracture toughness relationships and toughening mechanism of TC21 titanium alloy with lamellar microstructure

The independent influence of microstructural features on fracture toughness of TC21 alloy with lamellar microstructure was investigated. Triple heat treatments were designed to obtain lamellar microstructures with different parameters, which were characterized by OM and SEM. The size and content of α plates were mainly determined by cooling rate from single β phase field and solution temperature in two-phase field; while the precipitation behavior of secondary α platelets was dominantly controlled by aging temperature in two-phase field. The content and thickness of α plates and the thickness of secondary α platelets were important microstructural features influencing the fracture toughness. Both increasing the content of α plates and thickening α plates (or secondary α platelets) could enhance the fracture toughness of TC21 alloy. Based on energy consumption by the plastic zone of crack tip in α plates, a toughening mechanism for titanium alloys was proposed.     

肉桂特色资源加工利用产业发展现状

肉桂是我国特色经济林树种，我国肉桂种植面积和年产量均居世界首位。我国肉桂主要分布在两广地区，其中广西为14.9万hm²，广东为8.9万hm²，两地面积占全国肉桂分布总面积的95%以上。肉桂既是著名的香料又是传统的名贵中药，具有极高的经济价值，发展肉桂产业对于促进农民增收、维护健康中国有着重要的意义。本研究综述了肉桂资源量、分布情况及主要利用部位，介绍肉桂主要产品（如桂皮，桂枝，肉桂粉及肉桂油）及加工技术现状、产品质量控制及其分析检测方法，分析了产业未来的发展趋势，并提出了产业发展的对策和措施：加强肉桂标准化示范基地建设，提高优质资源供给能力；提高肉桂加工利用技术水平，延长产业链；培育肉桂龙头企业，提高产品市场竞争力。为我国肉桂特色资源加工利用产业的可持续发展提供一定的思路。     

Genetic algorithm to simultaneously optimise stope sequencing and equipment dispatching in underground short-term mine planning under time uncertainty

ABSTRACT

The main issue in short-term planning optimisation for underground mining is organising the mining process with limited resources in the form of equipment and materials to satisfy production targets and stable feed grade requirements. In this paper, an integrated optimisation model is proposed based on an individual generation algorithm and an improved Genetic Algorithm to simultaneously optimise stope extraction sequencing and timing, extracted ore grade and equipment dispatching. The model objectives are to shorten the time gap between the stope mining processes and the overall working time. When the uncertainty of equipment working time is taken into account in a short-term scheduling model, the Monte Carlo simulation is applied to evaluate the risk of not meeting the production target. A modification strategy is defined to evaluate equipment failure. Consequently, any available equipment is automatically reassigned to the mining site to replace the broken-down equipment. A case study is used to validate the model in the Sanshandao gold mine of China to formulate an optimal monthly schedule. Compared with the conventional approach, the new model could reduce the variance of ore tonnage and feed grade and improve the equipment allocation efficiency. Discussions are presented to address the uncertainty.     

桁架式火星探测器的着陆缓冲特性分析

着陆缓冲机构是着陆器实现行星探测软着陆的关键部位之一,它的缓冲性能直接关系到着陆器是否能安全地在行星表面实现软着陆。根据某院提供的火星着陆器模型,在三维建模软件中建立着陆器的合理简化模型,为了提高分析着陆器软着陆过程冲击响应的准确性,采用MSC公司的Patran/Dytran有限元软件,用瞬态动力学的方法对着陆器的缓冲性能进行分析。仿真结果与试验数据十分吻合,着陆器的缓冲和传力性能良好。因此,采用拉杆缓冲的桁架式火星着陆器是可行的,仿真结果与试验数据也为今后的火星探测提供了参考。     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。